| Product |
Dissolved Oxygen sensor |
| Model |
SUP-DO7019 |
| Principle |
Fluorescence |
| Range |
0-20mg/ L or 0-200 %saturation |
| Measurement Accuracy |
±3% |
| Response Time |
60s |
| Maximum Depth |
30m |
| Temperature Range |
0 ~ 50℃(non-freezing) |
| Temperature Accuracy |
±0.5℃ |
| Sensor Interfaces |
RS-485, MODBUS protocol |
| Power Requirements |
DC 9~24V,current <50mA |
| Construction |
M22*1.5(optionally convertible to NPT3/4thread), submersible installation |
| Sensor Size |
Φ22mm*152.7mm |
| Probe Cable Length |
10m (default), customizable |
| Calibration |
One-point or two-points calibration |
| Body Materials |
316L / Ti |
Note:
The above technical parameters are all data under laboratory standardliquidenvironment. Sensor life and maintenance calibration frequency are relatedtoactual field conditions.
DO monitoring is the most critical water quality parameter in aquaculture. Our ODOseries aquaculture optical dissolved oxygen sensor is specially designedforaquaculture applications. With embedded temperature sensor and robust RS485digital signal output, the sensor can be seamlessly connected toour onlinecontroller. The sensor can be easily integrated into wireless sensor networkandautomation controls.
Digital output, support RS485 / MODBUS.
No membrane, No electrolyte, No chemical interference, No frequent calibrationrequired. No oxygen consumption, No flow dependent.
Specially designed for aquaculture application.