SUP-7001 Flat pH electrode can be used for pH measurement of flue gas desulfurization (FGD), or other harsh environment, such as whitewash, seriflux, etc.
Zero potential point: 7 ± 0.5 pH
Conversion coefficient: > 96%
Installation size: 3/4NPT
Temperature: 5 ~ 80℃ for general cables
Specification
| Product | Flat pH sensor |
| Model | SUP-PH7001 |
| Measurement range | 0-14 pH |
| Zero potential point | 7 ± 0.5 pH |
| Slope | > 96% |
| Internal impedance | 150-250 MΩ(25℃) |
| Practical response time | < 1 min |
| Installation size | Upper and Lower 3/4NPT Pipe Thread |
| NTC | NTC10K/Pt100/Pt1000 |
| Heat resistance | 5-80℃ for general cables |
| Pressure resistance | 0.4MPa |
| Connection | Low-noise cable |
Introduction
Application
Industrial wastewater engineering
Process measurements, electroplating plants, paper industry, drinks industry
Wastewater containing oil
Suspensions, varnishes, media containing solid particles
Two-chamber system for when electrode poisons are present
Media containing fluorides (hydrofluoric acid) up to 1000 mg/l HF
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.
