SUP-LDG Sanitary electromagnetic flowmeter for food processing

Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.

Features

Accuracy: ±0.5%(Flow speed > 1m/s)

Reliably: 0.15%

Theoretical value: Water: Min. 20μS/cm; Other liquid: Min. 5μS/cm
Recommended value: >30μS/cm

Flange: ANSI/JIS/DIN DN15…1000

Ingress protection: IP65

Sanitary electromagnetic flowmeter
Sanitary electromagnetic flowmeter electromagnetic flowmeter water flowmeter
  • Specification

 Product  Sanitary type electromagnetic flowmeter
 Model  SUP-LDGS
 Diameter nominal  DN15~DN100
 Nominal pressure  0.6~4.0MPa
 Accuracy  ±0.5%,±2mm/s(flowrate<1m/s)
 Repetitiveness  0.2%
 Liner material  PFA, F46, Neoprene, PTFE, FEP
 Electrode material  Stainless steel SUS316L, Hastelloy C, Titanium,
   Tantalum, Platinum-iridium
 Medium temperature  Integral type: -10℃~80℃
   Split type: -25℃~180℃
 Ambient temperature  -10℃~55℃
 Power supply  100-240VAC,50/60Hz / 22VDC—26VDC
 Electrical conductivity  Water 20μS/cm other medium 5μS/cm
 Ingress protection  IP65, IP68(optional)
 Product standard  JB/T 9248-2015

 

  • Measuring principle

Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe. 

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

              Where:
              E-Induced electromotive force 
              K-Meter constant 
              B-Magnetic induction density
              V-Average flow speed in cross-section of measuring tube 
              D-Inner diameter of measuring tube                                                                            
magnetic flowmeter principle   

  • Introduction

  SUP-LDGS sanitary electromagnetic flowmeter is applicable for all food grade conductive liquids measure, such as drinking water, food processing, pharmaceutical industry and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer.

Sanitary electromagnetic flowmeter

Noted: the product strictly prohibited to be used in explosion-proof occasions.


  • Application

      Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

magnetic flowmeter application

  • Automatic calibration line

magnetic flowmeter calibration

mt flowmeter calibrate

yokogawa flowmeter magnetic

  • Stability test

emc test magnetic flowmeter

success story

mag flowmeter application

Sanitary flowmeter supplier

Inquiry