Sanitary installation and hygienic process demonstration

FIELD OF APPLICATION

SUP-LDGS sanitary electromagnetic flow meters deliver precision measurement for hygienic processing applications. Engineered for food-grade environments, they support all conductive liquids including drinking water, dairy products, pharmaceuticals, and food processing liquids.

These meters are widely used in:

Food and beverage processing
Pharmaceutical manufacturing
Biotech applications
CIP (Clean-in-Place) systems
Sanitary liquid transfer systems

Suitable for all industries requiring hygienic flow measurement with EHEDG, 3-A, and FDA compliant designs.

KEY BENEFITS

✓

Hygienic Design

Crevice-free construction with tri-clamp connections meets EHEDG and 3-A sanitary standards

✓

Food-Grade Materials

FDA-compliant PFA/PTFE liners and 316L stainless steel or Hastelloy electrodes

✓

Precision Measurement

±0.5% accuracy with 0.2% repeatability for quality control applications

✓

Easy Cleaning

Smooth surfaces and CIP-compatible design reduces cleaning time and validation requirements

✓

Compact Sanitary Sizes

DN15-DN100 (½"-4") diameter range with tri-clamp or hygienic flange connections

TECHNICAL SPECIFICATIONS

Product Type	Sanitary Electromagnetic Flow Meter
Model Number	SUP-LDGS
Nominal Diameter	DN15 - DN100 (½" - 4")
Pressure Rating	0.6~4.0MPa (87~580 psi)
Measurement Accuracy	±0.5% F.S. (velocity >1m/s) ±0.5% F.S.±2mm/s (velocity <1m/s)
Repeatability	0.2%
Liner Materials	PFA, F46, Neoprene, PTFE, FEP
Electrode Materials	316L Stainless Steel, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium Temperature Range	Integral type: -10°C to +80°C (14°F to 176°F) Split type: -25°C to +180°C (-13°F to 356°F)
Power Supply	100-240VAC, 50/60Hz or 22-26VDC
Minimum Conductivity	Water ≥20μS/cm, Other media ≥5μS/cm
Ingress Protection	IP65, IP68 (optional)
Compliance Standard	JB/T 9248-2015 (Chinese Industrial Standard for Electromagnetic Flow Meters)

SANITARY ELECTROMAGNETIC FLOWMETER PRINCIPLE

The SUP-LDGS operates based on Faraday's Law of Electromagnetic Induction. When conductive liquid flows through the magnetic field generated by the meter's coils, it induces a voltage signal proportional to the flow velocity. This voltage is detected by electrodes and converted to precise flow rate measurements.

E = K × B × V × D

(Standard electromagnetic flow meter equation)

E Induced EMF (mV)

B Magnetic Flux Density (T)

V Average Flow Velocity (m/s)

D Pipe Internal Diameter (m)