E = K × B × V × D

(Standard electromagnetic flow meter equation)

E Induced EMF (mV)

B Magnetic Flux Density (T)

V Average Flow Velocity (m/s)

D Pipe Internal Diameter (m)

Standard Industrial Configuration

Robust construction designed for harsh industrial environments with IP68 protection rating, 316L stainless steel housing, and explosion-proof options available.

Precision Calibration Process

Each electromagnetic flow meter undergoes rigorous flow testing with ±0.5% accuracy certification, NIST traceable calibration procedures, and 3-point verification at minimum flow, normal flow, and maximum flow rates.

Quality Assurance Testing

Multi-stage inspection including hydrostatic pressure testing (1.5× rated pressure), electrical safety checks, insulation resistance verification (>100MΩ), and final performance validation before shipment.

Water Treatment Applications

Accurate measurement for process control in water treatment plants with ISO 9001 certified production standards. Ideal for clean water, raw water, and wastewater applications with conductivity >20 μS/cm.

Chemical Processing Solutions

Corrosion-resistant materials for aggressive media including PTFE/PFA lining and Hastelloy C electrodes. Suitable for acids (pH 2-12), alkalis, and abrasive slurries with particle size <3mm.

Manufacturing Excellence

State-of-the-art production facility with automated assembly lines, full traceability system, and annual capacity of 50,000+ electromagnetic flow meters. Certified to ISO 9001:2015 quality standards.

A: The SUP-LDG requires fluids with ≥5 μS/cm conductivity for stable measurement. For optimal performance, we recommend >20 μS/cm. Typical tap water ranges 50-800 μS/cm.

A: Requires 5D upstream and 3D downstream straight pipe (D=pipe diameter). Works in any orientation but avoid top-down flow for gas-liquid mixtures. Must always run full in liquid applications.

A: Consider chemical compatibility, temperature, and abrasion:
- PTFE: Most chemicals <120°C
- PU: Abrasive slurries <60°C
- Neoprene: Low-cost water applications
Our engineers can provide material selection guidance.

A: Electromagnetic flow meters are virtually maintenance-free. Recommended checks:
- Annual electrode inspection (clean if coated)
- Verify grounding system integrity
- Calibration verification every 2-3 years