SUP-RD902 26GHz Radar level meter
non contact type radar level transmitter radar level transmitter installation types of radar level transmitter radar level instrument

SUP-RD902 26GHz Radar level meter

SUP-RD902 Non-contact radar level meter with simple commissioning, trouble-free operation saves time and money. For usage in a wide range of applications - be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.


  • Range: 0~30 m
  • Accuracy: ±3mm 
  • Application:  Liquid
  • Frequency Range: 26GHz


  • Specification
 Product  Radar level meter
 Model SUP-RD902
 Measure range 0-30 meters
 Application Liquid
 Process Connection Thread, Flange
 Medium Temperature -40℃~130℃(Standard type), -40℃~250℃(High temp type)
 Process Pressure    -0.1~4.0MPa
 Accuracy ±5mm ~±10mm
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA/HART (Two-wire/Four)
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction

  • Product Size


radar level meter

  • Radar level transmitter installation
level meter Level meter Level meter installation

Be installed in the diameter of the 1/4 or 1/6.   

Note: The minimum distance from the tank 

wall should be 200mm.

Note:  ① datum 

②The container center or axis of symmetry

The top conical tank level, can be installed at 

the top of the tank is intermediate, can guarantee 

the measurement to the conical bottom

 A feed antenna to the vertical alignment surface.  

 If the surface is rough, stack angle must be used 

 to adjust the angle of cardan flange of the antenna 

 to the alignment surface. 

  (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)